• <input id="ss0go"><input id="ss0go"></input></input>
  • <input id="ss0go"><code id="ss0go"></code></input>
  • <blockquote id="ss0go"></blockquote>
    <blockquote id="ss0go"></blockquote>
  • <xmp id="ss0go">

    Standard&Tailormade Stainless Steel Solution

    Product Detailed Location:Home>>Products>>Applications&S... > Prodct Detailed

    Petroleum and Petrochemical Industry

    Petroleum and petrochemical industry

    1.Stainless steel used in petroleum refining equipment.
    The stainless steel is used in petroleum refining equipments, whose main material brand is 0Cr13Al ferrite stainless steel; with the different resources of the petroleum, Cr-Ni austenite stainless steel is also used in some highly corrosive parts. The application status of stainless steel in the petroleum refining industry is shown in the following table:

    The application of stainless steel in the petroleum refining industry

    Name of the equipment


    Application position

    The distillation tower of the normal pressure crude oil distillation equipments

    Cr-Ni Austenite stainless steel

    0Cr13Al is used in the tower top and the pallet, under the existence of chloride; stainless steel is used the Cr-Ni austenite

    Decompression distillation equipment, 350-450, 1.3-2KPa


    The 5CrMo Commonly used,when treating the normal pressure residue oil of naphthenic acid, the 0Cr17Ni12Mo2 is used in the upper part of the refining tower with the temperature of 250-300

    The accelerant modification equipment 420-580


    The high temperature exchanger at the outlet of the reaction tower

    hydrogenation desulfurization device 200-500,3.4-196MPa


    Reaction tower
    Heating pipe, matching pipe, heat exchanging pipe. The pipes and panels of the tower use stainless steel bead welding
    The downstream machining equipments for treating wet sulfureted hydrogen. 
    The 0Cr13Al is used in the gasoline and kerosene equipments that contain less H2S

    The accelerant decomposing equipment, 500, normal pressure


    0Cr13Al or 0Cr18Ni9 is used in some parts on the decomposing tower

    Hydrogen making equipments, absorption and regeneration tower


    The pipeline that is carbon acid corrosion resistant

    The grease equipment for solvent extraction: furan aldehyde


    The heat exchanging pipe which is furan aldehyde corrosion resistant.

    Waste water treatment equipment


    Equipments on the distillation tower top

    Sulfur reclaiming equipments (250)


    The tower and the condenser

    Introduction Details

    The application of double phase stainless steel in the oil refining industry

    Name of the equipment


    The application position and purpose

    Ordinary decompressor


    Tower top liner, components inside the tower, normal top air cooler, top reducing wetting air cooler, core pipe of top reducing after-cold water cooler, liner of oil water separator. Solve the SCC problem

    Catalyzing and cracking devices


    Liner of catalyzing and absorbing tower, tower panel, float valve, gasoline reheat machine. Solve the problem of carbon steel’s hydrogen induced cracking, and the uniform corrosion of the austenite stainless steel (1Cr18Ni9Ti)

    Hydrogenation cracking devices


    Air cooler, solve the corrosive pitting of 0Cr13 and 0Cr17, as well as the SCC problem of 18-8 type austenite stainless steel

    Hydrogenation desulfidation devices


    Heat exchanger and water cooler, solve the SCC problem of the cyanide

    Waste water treatment equipments


    The heat exchanger and the pot top condenser of the DEA washing device, solve the corrosion pitting of Cr17. And the SCC problem of 00Cr17Ni12Mo2

    2.The stainless steel for petrochemical industry

    Regarding the waste gas of the petroleum refining factory, natural gas or naphtha as the raw material, through a series of chemistry reaction, it can produce ethylene, propylene, ethyne, etc., a further synthesizing can produce polythene, polystyrene, acetone, butadiene, etc. The machining process after the synthesizing is similar to the chemical industry, and will contact various acidity mediums, the serving environment is very severe, and the variation scale for the medium condition is large, and the materials in use are wide, they involve stainless steel, iron-nickel base anti-corrosion alloy, and nickel base anti-corrosion alloy.

    (1) Ethylene production.
    0Cr25Ni20 or high carbon 0Cr25Ni20 centrifugal casting pipe is used in the furnace tube of the thermal decomposition furnace, which is a choice made according to the high temperature and high creep rupture strength. Incolog800 alloy is adopted in the pipeline. Under the low temperature condition, low temperature steel should be used, and the 0Cr18Ni9 is used only under the condition of -100--175

    (1) Ethyne 
    In the production of ethyne, as the decomposing temperature is above 1100
    , the alloy brand in use is higher than the one used in producing ethylene.

    (3) Other treating process
    Other treating processes including oxidation, hydration, dehydrogenation, dehydration, alkylation, anisotropisation ect. The equipments will contact the relevant acidity mediums, and the materials in use are mainly 0Cr17Ni14Mo2 and 00Cr17Ni14Mo2
    ,Inconel600、Incoloy800,No.20 alloy and Hastelloy B、C、D, etc. The process conditions of work are shown in the table below. In the process of petroleum chemical engineering, sulfuric acid, hydrofluoric acid, phosphoric acid, hydrochloric acid and other corrosive mediums need to be used in some processes. According to the acid concentration, different corrosion resistant materials are used with the different temperature.